Zibo Yunneng Kiln Technology Co. Ltd. Zibo Yunneng Kiln Technology Co. Ltd.
Free delivery samples
high quality assurance
Engineer's door-to-door guidance
lifelong technical support
Contact us+86159669653330086-533-5331887
Home -> News -> News -> Technical knowledge ->
Water cooling chamber
The water cooling air chamber adopts single-layer medium insulation castable structure (physical and chemical indexes are shown in the attached table). Medium insulation castable has good fire resistance, high thermal vibration and certain impact resistance, and is an ideal lining material for this part.
Construction process: heat resistant nails are welded to the four walls of the water and cold air chamber, and the density is in accordance with the design requirements of the drawing.
There is no nail nail design for the ceiling under wind distribution on the drawing. In actual construction, it must be welded, which can be welded in the wind
Between cap sleeve, because it is shaking force when the boiler run, without welding forcer roof is easy to fall off, 1 mm on the forcer coated with asphalt, reserved expansion joint, intermediate insulation castable can be a die casting ramming forming, either way, after construction of the object must be strong, level off, smooth, thickness according to drawing size requirement, ceiling construction don't plug cap width.
Attached table of medium quality thermal insulation pouring specification
Item | parameter | |
refractory temperature ℃ | >1500 | |
volume density g/cm3 | >1.6 | |
pressive strength MPa | 110℃ | >30 |
800℃ | >35 | |
1100℃ | >35 | |
bending strengthMPa | 110℃ | >10 |
1100℃ | >15 | |
1350℃ | >15 | |
reburn line changes % | 0.2 | |
thermal rock stability time | >20 | |
working temperature ℃ | 1350 |
Relevant Product Display
Relevant information
Hotline